Ayurvedic Herb Forms Explained: Raw, Powder, Oil and Extract

Ayurvedic herbs are traded in five broad forms: fresh or raw material, dried whole or cut herb, powder, oil and extract. The right form depends on your process. Formulators who grind or decoct in-house usually buy dried whole or cut herbs, cosmetic and food brands often prefer powders or extracts, and oil makers buy base oils, essential oils or herbal infused oils.
Below we explain each form, where it is typically used in industry and how to store it so it stays within specification.
Key points
- Dried whole or cut herbs are the easiest to identify and the most flexible to process.
- Powders are convenient but harder to authenticate by eye; specify mesh size and moisture.
- Oils fall into three different groups: pressed fixed oils, distilled essential oils and herbal infused oils.
- Extracts are described by ratio or by standardisation to a marker compound; ask which.
- All forms last longest when kept cool, dry, dark and sealed.
What is a raw or fresh herb?
Fresh material is the plant part as harvested: leaves, roots, rhizomes or fruits that have not yet been dried. Some traditional Kerala oil and decoction processes call for fresh herbs, and fresh rhizomes such as ginger and turmeric are traded as agricultural produce. For most buyers, however, fresh herbs are impractical: they spoil quickly and are usually used close to where they grow.
What does "dried whole" or "cut and sifted" mean?
Most medicinal plant trade is in dried material. "Whole" means roots, fruits, bark pieces or leaves dried without further size reduction. "Cut and sifted" (sometimes written as C/S or tea bag cut) means the dried herb has been cut into small, even pieces and sieved to remove fines and dust.

Typical uses: Ayurvedic manufacturers who prepare decoctions (kashayam), medicated oils or their own powders; herbal tea blenders; extract makers.
Why buyers like it: whole and cut material keeps its shape, so identity can be checked by eye, under a microscope and by simple tests. It also tends to keep aroma and active constituents longer than powder.
What should you know about herbal powders?
A powder is the dried herb ground to a stated particle size. Particle size is usually given as a mesh number (for example 40, 60 or 80 mesh), and the right figure depends on your process: capsule filling, tablet blending, face packs and hair powders all have different needs.
Typical uses: capsules and tablets, churna-type blends, cosmetic face packs and hair powders, food and beverage premixes.
Points to watch: grinding destroys most visible features, so a powder is harder to authenticate than whole material. Ask for microscopy or TLC identity results, set a moisture limit, and if possible buy whole material and have it ground under your supervision. Powders also have a larger surface area, so they absorb moisture and lose aroma faster.
Which kinds of herbal oils are traded?
"Herbal oil" covers three quite different products:
- Fixed (carrier) oils are pressed from seeds, kernels or fruit. Coconut oil and sesame oil are the classic bases of Kerala oil preparations; neem seed oil is another example.
- Essential oils are volatile aromatic oils, usually obtained by steam distillation. Vetiver root, ginger, black pepper, cardamom and turmeric are distilled in India for flavour, fragrance and cosmetic use.
- Herbal infused oils are made by processing herbs in a base oil. In Ayurveda, oil preparations called taila are made by slowly cooking a base oil with herbal pastes and decoctions according to classical methods. In India, Ayurvedic medicinal oils are regulated products made by licensed manufacturers; cosmetic hair and body oils follow cosmetic rules.
Typical uses: hair oils, massage and body oils, soaps, perfumery and aromatherapy blends, flavours.
What is a herbal extract, and how is it described?
An extract is a concentrate made by soaking or percolating the herb in a solvent such as water, water-ethanol mixtures or, for some products, other approved solvents, and then concentrating or drying the result. Extracts are usually sold as dry powders, soft (thick) extracts or liquids.
- Ratio extracts state how much raw herb went into a unit of extract, for example 10:1. Different manufacturers calculate ratios differently, so ask how theirs is defined.
- Standardised extracts are adjusted to contain a stated percentage of a marker compound, measured by an agreed method such as HPLC.
- Oleoresins, such as those from turmeric, ginger and black pepper, are solvent-extracted concentrates widely used by the food industry. Kerala has a well-established spice oleoresin industry.
Typical uses: nutraceutical capsules, beverages, cosmetic serums and creams, flavour and colour applications. Always ask which solvent was used, what carrier (if any) was added and how residual solvents are controlled.
How do the forms compare?
| Form | Typical buyers | Identity check | Storage sensitivity |
|---|---|---|---|
| Dried whole / cut | Ayurvedic manufacturers, tea blenders, extractors | Easiest (visual, microscopy, TLC) | Moderate: moisture, insects |
| Powder | Capsule, cosmetic and food makers | Harder (microscopy, TLC) | High: moisture, aroma loss |
| Fixed oil | Hair, body oil and soap makers | Physico-chemical tests | Rancidity: heat, light, air |
| Essential oil | Fragrance, flavour, cosmetic brands | GC profile | High: light, air, heat |
| Extract | Nutraceutical and cosmetic brands | Marker assay, TLC/HPLC | High: moisture (dry extracts) |
How should each form be stored?
- Dried herbs: keep in lined bags off the floor, in a cool, dry, well-ventilated store, away from direct sun. Use first-in, first-out and inspect for insects and mould.
- Powders: keep in sealed, moisture-proof packs, close them promptly after sampling and avoid humid rooms. Add desiccant where your process allows.
- Fixed oils: store in full, closed, food-grade containers away from heat and light to slow oxidation.
- Essential oils: keep in tightly closed amber glass, aluminium or lined containers, cool and dark, with as little headspace as possible.
- Extracts: dry extracts are often hygroscopic; keep them sealed with desiccant and follow the maker's retest date.
Which form should you choose?
If you have your own grinding or extraction, dried whole or cut herb gives you the most control. If you need a ready-to-use ingredient, a powder or extract saves processing, but demands stronger identity and quality documents. Our article on quality checks for herbal raw materials lists the tests to ask for, and our buyer's guide to sourcing from Kerala shows how to write a clear specification.
Global Ayurveda accepts enquiries for Kerala herbal raw materials in raw, dried, powder and oil forms. Availability and documents are confirmed for each request through our enquiry page.
Frequently asked questions
Is powder or whole herb better for a manufacturer?
Whole or cut herb is easier to authenticate and keeps longer; powder saves a processing step. Many manufacturers buy whole material and grind it themselves or under supervision.
What does 10:1 on an herbal extract mean?
It usually means about ten parts of dried herb were used to make one part of extract. Manufacturers calculate ratios differently, so ask for their definition and any marker-compound assay.
What is the difference between a herbal oil and an essential oil?
An essential oil is a volatile aromatic oil, usually steam-distilled. A herbal infused oil is a base oil such as coconut or sesame oil processed with herbs.
How long do herbal powders keep?
It depends on the herb, moisture and packing. Powders lose aroma and pick up moisture faster than whole herbs, so keep them sealed and follow the supplier's stated retest or best-before date.
Kerala herbal raw materials for buyers in India and worldwide — send an enquiry.